performance of industrial grinding dust collector The function of the wet air depends on the practice of filtering the wind speed, therefore, If the treatment temperature of the performance of industrial grinding dust collector is determined and the cooling of the gas is diluted, Then at this temperature, the performance of industrial grinding dust collector processing air volume, as well as the amount of diluted air. When calculating the required filtration area, the filtration speed is the practical filtration speed, which is the change of the customary dust source. When the dust collector planning needs to add some spare air volume on top of the normal air volume, then the performance of industrial grinding dust collector is planned according to the high air volume. If the performance of industrial grinding dust collector works under conditions that exceed the regular processing air volume and filtration speed, its pressure loss will be greatly increased, the filter cloth may be blocked, the dust removal power will also decrease, and even become the cause of the sharp rise in the frequency of other faults. However, if the reserve air volume is too large, the investment cost and working cost of a single boiler dust collector will be added.
performance of industrial grinding dust collector is a kind of air purification equipment with small volume and good dust removal rate. Suitable for all kinds of single dust production points, flexible and convenient, local dust collection, local treatment, can determine the cleanliness of the air. The basic structure is composed of dust removal box, centrifugal fan, filter bag (filter cartridge), dust collector and microcomputer controller, etc. The dust is sucked inside the dust collector box by the negative pressure of the fan through the dust suction pipe, and the use of gravity and actual concrete as the mainstream, the coarse particle dust is initially filtered by the filter and directly dropped to the dust collector, and the fine dust is captured by the filter on the outer surface. The clean gas flows into the clean room after filtration and purification through the filter element, and is discharged from the outlet by the fan. The whole process of dust removal and filtration is the result of comprehensive effects such as gravity, inertial force, collision, electrostatic adsorption and screening.
performance of industrial grinding dust collector What is the design concept? Here is a detailed introduction for you:
First, the application of computer-aided design software, CNC processing equipment, mold production, to the modular structure, can be arbitrarily combined the number of layers and columns.
Second, the use of encapsulation type polyester felt flat cloth bag, good service life.
Third, the modular flat bag dust collector is a submerged flow design, which reduces the influence of dust driven by turbulence and saves electricity and energy.
4. Modular flat bag dust collector filters dust above 0.003um, special configuration can reach the emission requirements below 0.3mg/m3, and the whole noise of the dust collector is less than 80dB.
5. The filter bag is changed outside the inspection door in front of the modular flat bag dust collector to prevent dust from entering the clean air chamber, which is easy to operate and maintain.
6. Flexible inlet and outlet design can achieve complex and changeable installation sites.
performance of industrial grinding dust collector pays attention to the role of cleaning dust, although there will be dust exceeding the standard, but once such a situation occurs, You lose the use of the performance of industrial grinding dust collector. When the performance of industrial grinding dust collector is discharged during use, and the operating pressure is relatively low, It may be because the surface flour layer of the performance of industrial grinding dust collector is not up to standard. The reason for this phenomenon may be that the filtration speed is relatively good, and the filter bag is clear for a short time, and the pressure of compressed air when spraying is too high. There is also a reduction in the load type of dust, which may cause excessive dust.
performance of industrial grinding dust collector https://www.kaisenfilter.com/KSZHDM-01-Combined-Grinding-Dust-Collector.html
