In the course of the application of resistors, we have encountered various different types of resistors. active vs passive components in electronics is a very popular part of this, so do you really understand its advantages? In this article, our resistor manufacturers will share and interpret the relevant content for you!
1, carbon exists in electronics, electrical appliances, the largest number of users, the cheapest fixed stainless steel resistance carbon reliability, high quality and stability of IT products. The active vs passive components in electronics are based on high temperature vacuum carbon compounds are separated, tightly attached to the surface of the ceramic rod of the carbon resistor, while thin cut from the corresponding connector, and its surface is coated with an epoxy seal for protection.
Advantages: Simple production, low cost
2, stainless steel metal oxide film resistor, as part of its development of electronic equipment, has also become a smaller, lighter, durable and other trends. Resistors at high temperatures, can have long-term stability, stability, each unit area resistor should be loaded with higher power to meet their requirements to work, and stainless steel metal oxide film resistors are suitable resistors.
Advantages: small size, high precision, good stability, low noise, low inductance
3, stainless steel winding resistance, non-inductive winding active vs passive components in electronics. The asexual thermal resistance wire is wrapped around the ceramic body and coated with a heat-resistant, moisture-resistant, non-flammable paint to protect it from corrosion. Its characteristics are as follows: excellent heat resistance, small temperature coefficient, light weight, short-term overload resistance, low noise, resistance to small changes for many years.
Advantages: High power
4, stainless steel wire wound resistor cement, resistance wire wound in heat-resistant ceramic sheet or unsalty oxide film resistor with stainless steel and other fixed resistors, plus external heat, moisture and corrosion resistant materials to protect fixed together. Cement type resistor The resistor is placed in the porcelain in the square, with a special cement filling made of non-combustible heat and sealed.
Advantages: High power resistance, easy heat dissipation, high stability.
So the above is the advantage of active vs passive components in electronics interpretation, I hope you can serve as an important reference, we believe that through sharing, you will have a more in-depth understanding and understanding of it!
active vs passive components in electronics https://www.unikeyic.com/blog/active-vs-passive-components-in-electronics-key-differences-and-applications.html
