The following article mainly introduces the common faults and solutions of cordless grass and hedge trimmer. It is practical and I hope it can help you!
1. Belt slip occurs during the production of cordless grass and hedge trimmer.
Cause: uneven feeding, resulting in cordless grass and hedge trimmer clogging; Improper matching of belt and pulley; The motor is fixed loosely.
Solution: uniform cutting; Replace the belt or pulley with the manufacturer, accessories must be appropriate; Check screw fastening regularly to ensure screw fastening.
2. cordless grass and hedge trimmer are blocked.
Reason: blade aging, fracture; The hole of the screen is blocked or broken; The water content of the crushed material is too large.
Solution: Check the use of the blade in time, find the problem in time to replace; Clean the screen regularly to ensure that the screen is clean; Ensure that the water content of the crushed material is less than 14%.
3, cordless grass and hedge trimmer Slow or no discharge.
Cause: The air inlet is not open or the screen is blocked.
Solution: check the baffle plate of the air inlet and open the air inlet; Check the use of the screen and clean it in time.
4, cordless grass and hedge trimmer production decreased during use.
Cause: blade wear; Changes in materials (different materials have different hardness and humidity, which will cause changes in the output of the machine during the crushing process).
Solution: Replace a new blade; If it is due to the replacement of crushed materials caused by the decline in production is normal.
cordless grass and hedge trimmer https://www.keylead.cn/Grass-Mower-KLD-BC4302.html
